|
RULE-A-MATIC
THE ACCEPTED AUTOMATIC SWITCH
Submersible. Ignition protected. The accepted automatic
switch of very selective yachtsman, boat builders and commercial
fishermen the world over. Ultrasonic welding assures a perfect hermetic seal.
No battery drain. Utilizes simple float principle. No exposed metal to
corrode. Good for voltages up to and including 110V AC.
PRICE EA.
22.50
|
|
|
RULE
SUPER SWITCH
Converts any pump to automatic.
Submersible ignition protected. The ultimate protection in switch design.
Ultrasonically welded. Extra heavy duty wired. Large float provides more
buoyancy - less on/off cycling. Wire is kept up and out of the way by a
groove molded into the switch. No battery drain. Good for voltages up to
110VAC. Optional Rule Super Switch Guard prevents flotsam from jamming the
switch in the on or off position. An exclusive “push-to-test”
button.
PRICE EA.
46.99 W/O
GUARD 51.99 W/ GUARD
|
|
|
MAYFAIR AUTOMATIC
BILGE PUMP SWITCH
Make any electrical
bilge operate entirely automatically with the anti-spike 601 switch. Internal
features prevent sudden on/ off cycling action caused by heavy seas or on
wavy water at high speeds. A micro switch activated by a rolling steel ball,
can be heard as the pump is turned on. The high 15 amp rating makes switch
ideal for pumps with high amp draw. Switch is suitable for use with 6, 12, or
32V bilge pumps within amp range.
PRICE EA.
14.99
|
|
|
RULE
3700
RULE HEAVY DUTY BILGE PUMP
Heavy duty construction
for both commercial and pleasure boat use. Features: Rule exclusive
permanently lubricated “ball bearing” motor results in longer
motor and seal life, lower amp draw, less motor drag and lower motor
temperatures. New more powerful “LongStack”
motor manufactured by Rule Industries. Ignition protected. Double insulation
dramatically reduces possibility of shaft electrolysis. Water cooled motor
for longer life. Heat resistant Acetal resin
housing provides strength and impact resistance. Exclusive Rule moisture
tight seals. No burn-out when run dry. Exclusive space-age 5/16 stainless
steel shaft for longer life and added reliability. Easy
“snap-on-snap-off” strainer base. Hose size: 1-1/2". 3500 gph.
PRICE EA
158.99
|
|
|
JABSCO PUMPS
JABSCO DC COMMERCIAL DUTY PUMPS
The Commercial Duty
Water Puppy uses the same pressure cast
pump head but has an increased flow rate and
durability to meet
the demands of commercial and workboat applications.
High
speed long-life motor with ball type shaft bearings.
JABSCO DC MOTOR PUMP
COMMERCIAL DUTY
- Reversible
- 12VDC@9 amp
or
- 32V DC @ 3 amp
- 7.8 8pm @ 2.1 psi
- Nitrile Impeller
- 1/2" IPT
PRICE EA.
220.00
|
|
|
RULE 500 BILGE PUMP
Submersible. Ignition
protected. Pumps 500 gph, miniature in size and
cost. The Rule 450 pump offers many of the design features of higher capacity
pumps. A "Best Buy" for the small boat owner. Exclusive Rule Teflon
seal for highest reliability. Ultrasonic welding adds extra strength and
eliminates housing leads. Water cooled for longer pump life. Non-corroding
stainless steel shaft. Low amp draw. Hose: 3/4". Marine UL Listed Bilge
Pump 939E.
PRICE EA.
19.99
|
|
|
RULE 800 BILGE PUMP
Designed for smaller
boats, his pump offers 36 variations in mounting. It is compact efficient,
maintenance free. Totally submersible, ignition protected, anti airlock
features. Exclusive Rule moisture-tight seals. Positive snap lock strainer
base. Silent running. Vibration-less. Water cooled motor. Stainless steel
shaft
PRICE EA.
38.99
|
|
|
RULE 1000 BILGE PUMP
Submersible. Ignition
protected. Pumps 1000 gph, yet small enough to fit
in deep "V" powerboat hulls and other normally inaccessible areas.
Exclusive air and water cooling for longer life. Exclusive Rule design and
manufactured Teflon seal prevents shaft wear and seals out moisture. Will not
airlock, the only pump of its size with this feature. Hose: 1 1/8".
Marine UL Listed Bilge Pump 939E. Carded
PRICE EA.
35.99
|
|
|
RULE 1500 BILGE PUMP
Submersible. Ignition
protected. The Rule 1500 pump continues to offer more pumping capacity and
more exclusive design features than any other competitive "high
capacity" pump. Thousands of boat owners will choose the Rule 1500 pump
as "the" pump they can rely on. Hose: 1 1/8". 1500 gph.
PRICE EA.
65.50
|
|
|
RULE 2000 GPH 5 YEAR
PUMP
GUARANTEED 5 YEARS
AGAINST FAILURE AND WEAROUT
So advanced are the
combination of features in the new Rule 5 year pump that we can support our
claims of pump reliability with an exclusive 5 year limited warranty against
wear out. Superior engineering, innovative design and unmatched experience,
have produced an efficient, maintenance free, compact bilge pump for the
yachtsman who demands only he finest for his craft. The double insulated, 2
wire construction eliminates shaft electrolysis.
Hose: 1 1/8". Marine UL Listed Bilge Pump 939E. 2000 gph.
PRICE EA.
129.50
|
|
|
RULE 2000 BILGE PUMP
Submersible.
Ignition protected. The Rule 2000 pump is the largest selling high capacity
submersible bilge pump in the world. With its longer life, higher pumping
capacity (2000 gph), compact size and many of he
features found only in the new Rule 5 year pump, the Rule 2000 pump with its
heavy duty motor is the undisputed choice of yachtsmen and commercial
fishermen. Hose: 1 1/8". Marine UL Listed Bilge Pump 939E. 2000 gph.
PRICE EA.
94.50
|
|
